| | UT_SERIAL_ASYNCH |
| ARM | DISCO_F746NG |
OK
DISCO_F746NG[F137]
Asynch serial test (req 2 serial peripherals) in 2.00 sec
MBED: Instrumentation: "COM43" and disk: "G:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for DISCO_F746NG with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 1 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms
OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)
{{success}}
{{end}}
|
|
| | UT_SERIAL_ASYNCH |
| GCC_ARM | DISCO_F746NG |
OK
DISCO_F746NG[F137]
Asynch serial test (req 2 serial peripherals) in 2.00 sec
MBED: Instrumentation: "COM43" and disk: "G:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for DISCO_F746NG with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms
OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)
{{success}}
{{end}}
|
|
| | UT_SERIAL_ASYNCH |
| IAR | DISCO_F746NG |
OK
DISCO_F746NG[F137]
Asynch serial test (req 2 serial peripherals) in 1.99 sec
MBED: Instrumentation: "COM43" and disk: "G:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for DISCO_F746NG with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms
OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)
{{success}}
{{end}}
|
|
| | UT_SERIAL_ASYNCH |
| uARM | DISCO_F746NG |
OK
DISCO_F746NG[F137]
Asynch serial test (req 2 serial peripherals) in 2.01 sec
MBED: Instrumentation: "COM43" and disk: "G:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for DISCO_F746NG with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 1 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms
OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)
{{success}}
{{end}}
|
|
| | UT_SERIAL_ASYNCH |
| ARM | NUCLEO_F746ZG |
OK
NUCLEO_F746ZG[F903]
Asynch serial test (req 2 serial peripherals) in 2.00 sec
MBED: Instrumentation: "COM45" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F746ZG with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 1 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms
OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)
{{success}}
{{end}}
|
|
| | UT_SERIAL_ASYNCH |
| GCC_ARM | NUCLEO_F746ZG |
OK
NUCLEO_F746ZG[F903]
Asynch serial test (req 2 serial peripherals) in 2.04 sec
MBED: Instrumentation: "COM45" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F746ZG with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms
OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)
{{success}}
{{end}}
|
|
| | UT_SERIAL_ASYNCH |
| IAR | NUCLEO_F746ZG |
OK
NUCLEO_F746ZG[F903]
Asynch serial test (req 2 serial peripherals) in 2.01 sec
MBED: Instrumentation: "COM45" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F746ZG with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms
OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)
{{success}}
{{end}}
|
|
| | UT_SERIAL_ASYNCH |
| uARM | NUCLEO_F746ZG |
OK
NUCLEO_F746ZG[F903]
Asynch serial test (req 2 serial peripherals) in 2.04 sec
MBED: Instrumentation: "COM45" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F746ZG with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 1 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms
OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)
{{success}}
{{end}}
|
|
| | UT_SERIAL_ASYNCH |
| ARM | NUCLEO_F767ZI |
OK
NUCLEO_F767ZI[F6AD]
Asynch serial test (req 2 serial peripherals) in 2.04 sec
MBED: Instrumentation: "COM50" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F767ZI with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 1 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms
OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)
{{success}}
{{end}}
|
|
| | UT_SERIAL_ASYNCH |
| GCC_ARM | NUCLEO_F767ZI |
OK
NUCLEO_F767ZI[F6AD]
Asynch serial test (req 2 serial peripherals) in 2.04 sec
MBED: Instrumentation: "COM50" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F767ZI with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms
OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)
{{success}}
{{end}}
|
|
| | UT_SERIAL_ASYNCH |
| IAR | NUCLEO_F767ZI |
OK
NUCLEO_F767ZI[F6AD]
Asynch serial test (req 2 serial peripherals) in 2.03 sec
MBED: Instrumentation: "COM50" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F767ZI with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms
OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)
{{success}}
{{end}}
|
|
| | UT_SERIAL_ASYNCH |
| uARM | NUCLEO_F767ZI |
OK
NUCLEO_F767ZI[F6AD]
Asynch serial test (req 2 serial peripherals) in 2.03 sec
MBED: Instrumentation: "COM50" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F767ZI with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 1 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms
OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)
{{success}}
{{end}}
|
|