| | UT_SERIAL_ASYNCH |
| ARM |
NUCLEO_F103RB |
OK
NUCLEO_F103RB[CC78]
Asynch serial test (req 2 serial peripherals) in 1.99 sec
MBED: Instrumentation: "COM63" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F103RB with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 1 ms
TEST(Serial_Asynchronous, char_matching_failed) - 2 ms
TEST(Serial_Asynchronous, char_matching_success) - 1 ms
TEST(Serial_Asynchronous, rx_framing_error) - 3 ms
TEST(Serial_Asynchronous, rx_parity_error) - 2 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 2 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms
OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 57 ms)
{{success}}
{{end}}
|
|
| | UT_SERIAL_ASYNCH |
| GCC_ARM |
NUCLEO_F103RB |
TIMEOUT
NUCLEO_F103RB[CC78]
Asynch serial test (req 2 serial peripherals) in 40.36 sec
MBED: Instrumentation: "COM63" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F103RB with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
Operator new out of memory
|
|
| | UT_SERIAL_ASYNCH |
| IAR |
NUCLEO_F103RB |
TIMEOUT
NUCLEO_F103RB[CC78]
Asynch serial test (req 2 serial peripherals) in 40.33 sec
MBED: Instrumentation: "COM63" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F103RB with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
|
|
| | UT_SERIAL_ASYNCH |
| uARM |
NUCLEO_F103RB |
OK
NUCLEO_F103RB[CC78]
Asynch serial test (req 2 serial peripherals) in 2.00 sec
MBED: Instrumentation: "COM63" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F103RB with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 1 ms
TEST(Serial_Asynchronous, char_matching_failed) - 2 ms
TEST(Serial_Asynchronous, char_matching_success) - 1 ms
TEST(Serial_Asynchronous, rx_framing_error) - 3 ms
TEST(Serial_Asynchronous, rx_parity_error) - 2 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 2 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms
OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 57 ms)
{{success}}
{{end}}
|
|