UT_SERIAL_ASYNCH
ARMDISCO_F429ZI
OK
DISCO_F429ZI[F4AE]
Asynch serial test (req 2 serial peripherals) in 2.02 sec
MBED: Instrumentation: "COM51" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for DISCO_F429ZI with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 2 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 1 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
GCC_ARMDISCO_F429ZI
OK
DISCO_F429ZI[F4AE]
Asynch serial test (req 2 serial peripherals) in 2.03 sec
MBED: Instrumentation: "COM51" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for DISCO_F429ZI with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
IARDISCO_F429ZI
OK
DISCO_F429ZI[F4AE]
Asynch serial test (req 2 serial peripherals) in 2.01 sec
MBED: Instrumentation: "COM51" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for DISCO_F429ZI with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
uARMDISCO_F429ZI
OK
DISCO_F429ZI[F4AE]
Asynch serial test (req 2 serial peripherals) in 2.03 sec
MBED: Instrumentation: "COM51" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for DISCO_F429ZI with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 1 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
ARMNUCLEO_F401RE
OK
NUCLEO_F401RE[F339]
Asynch serial test (req 2 serial peripherals) in 2.04 sec
MBED: Instrumentation: "COM39" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F401RE with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 2 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 1 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
GCC_ARMNUCLEO_F401RE
OK
NUCLEO_F401RE[F339]
Asynch serial test (req 2 serial peripherals) in 2.00 sec
MBED: Instrumentation: "COM39" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F401RE with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
IARNUCLEO_F401RE
OK
NUCLEO_F401RE[F339]
Asynch serial test (req 2 serial peripherals) in 1.99 sec
MBED: Instrumentation: "COM39" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F401RE with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
uARMNUCLEO_F401RE
OK
NUCLEO_F401RE[F339]
Asynch serial test (req 2 serial peripherals) in 2.05 sec
MBED: Instrumentation: "COM39" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F401RE with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 1 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
ARMNUCLEO_F410RB
OK
NUCLEO_F410RB[F600]
Asynch serial test (req 2 serial peripherals) in 2.04 sec
MBED: Instrumentation: "COM54" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F410RB with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 2 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 1 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
GCC_ARMNUCLEO_F410RB
OK
NUCLEO_F410RB[F600]
Asynch serial test (req 2 serial peripherals) in 2.01 sec
MBED: Instrumentation: "COM54" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F410RB with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
IARNUCLEO_F410RB
OK
NUCLEO_F410RB[F600]
Asynch serial test (req 2 serial peripherals) in 2.02 sec
MBED: Instrumentation: "COM54" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F410RB with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
uARMNUCLEO_F410RB
OK
NUCLEO_F410RB[F600]
Asynch serial test (req 2 serial peripherals) in 2.05 sec
MBED: Instrumentation: "COM54" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F410RB with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 1 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
ARMNUCLEO_F411RE
OK
NUCLEO_F411RE[FF5D]
Asynch serial test (req 2 serial peripherals) in 2.01 sec
MBED: Instrumentation: "COM52" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F411RE with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 2 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 1 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
GCC_ARMNUCLEO_F411RE
OK
NUCLEO_F411RE[FF5D]
Asynch serial test (req 2 serial peripherals) in 1.99 sec
MBED: Instrumentation: "COM52" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F411RE with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
IARNUCLEO_F411RE
OK
NUCLEO_F411RE[FF5D]
Asynch serial test (req 2 serial peripherals) in 2.03 sec
MBED: Instrumentation: "COM52" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F411RE with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
uARMNUCLEO_F411RE
OK
NUCLEO_F411RE[FF5D]
Asynch serial test (req 2 serial peripherals) in 2.00 sec
MBED: Instrumentation: "COM52" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F411RE with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 1 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
ARMNUCLEO_F429ZI
OK
NUCLEO_F429ZI[F4AE]
Asynch serial test (req 2 serial peripherals) in 2.01 sec
MBED: Instrumentation: "COM41" and disk: "G:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F429ZI with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 2 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 1 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
GCC_ARMNUCLEO_F429ZI
OK
NUCLEO_F429ZI[F4AE]
Asynch serial test (req 2 serial peripherals) in 2.01 sec
MBED: Instrumentation: "COM41" and disk: "G:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F429ZI with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
IARNUCLEO_F429ZI
OK
NUCLEO_F429ZI[F4AE]
Asynch serial test (req 2 serial peripherals) in 2.01 sec
MBED: Instrumentation: "COM41" and disk: "G:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F429ZI with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
uARMNUCLEO_F429ZI
OK
NUCLEO_F429ZI[F4AE]
Asynch serial test (req 2 serial peripherals) in 1.99 sec
MBED: Instrumentation: "COM41" and disk: "G:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F429ZI with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 1 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
ARMNUCLEO_F446RE
OK
NUCLEO_F446RE[964A]
Asynch serial test (req 2 serial peripherals) in 2.00 sec
MBED: Instrumentation: "COM53" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F446RE with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 2 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 1 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
GCC_ARMNUCLEO_F446RE
OK
NUCLEO_F446RE[964A]
Asynch serial test (req 2 serial peripherals) in 2.04 sec
MBED: Instrumentation: "COM53" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F446RE with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
IARNUCLEO_F446RE
OK
NUCLEO_F446RE[964A]
Asynch serial test (req 2 serial peripherals) in 2.02 sec
MBED: Instrumentation: "COM53" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F446RE with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
uARMNUCLEO_F446RE
OK
NUCLEO_F446RE[964A]
Asynch serial test (req 2 serial peripherals) in 2.02 sec
MBED: Instrumentation: "COM53" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F446RE with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 1 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
ARMNUCLEO_F446ZE
OK
NUCLEO_F446ZE[F12F]
Asynch serial test (req 2 serial peripherals) in 2.03 sec
MBED: Instrumentation: "COM60" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F446ZE with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 2 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 1 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
GCC_ARMNUCLEO_F446ZE
OK
NUCLEO_F446ZE[F12F]
Asynch serial test (req 2 serial peripherals) in 2.03 sec
MBED: Instrumentation: "COM60" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F446ZE with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
IARNUCLEO_F446ZE
OK
NUCLEO_F446ZE[F12F]
Asynch serial test (req 2 serial peripherals) in 2.02 sec
MBED: Instrumentation: "COM60" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F446ZE with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 0 ms
TEST(Serial_Asynchronous, char_matching_failed) - 0 ms
TEST(Serial_Asynchronous, char_matching_success) - 0 ms
TEST(Serial_Asynchronous, rx_framing_error) - 0 ms
TEST(Serial_Asynchronous, rx_parity_error) - 0 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 0 ms)

{{success}}
{{end}}
UT_SERIAL_ASYNCH
uARMNUCLEO_F446ZE
OK
NUCLEO_F446ZE[F12F]
Asynch serial test (req 2 serial peripherals) in 2.02 sec
MBED: Instrumentation: "COM60" and disk: "F:"
HOST: Copy image onto target...
1 file(s) copied.
HOST: Initialize serial port...
Looking for NUCLEO_F446ZE with MBEDLS
...port ready!
HOST: Reset target...
HOST: Property 'timeout' = '20'
HOST: Property 'host_test_name' = 'default_auto'
HOST: Property 'description' = 'Unit test'
HOST: Property 'test_id' = 'UT'
HOST: Start test...
TEST(Serial_Asynchronous, char_matching_with_complete) - 2 ms
TEST(Serial_Asynchronous, char_matching_failed) - 1 ms
TEST(Serial_Asynchronous, char_matching_success) - 2 ms
TEST(Serial_Asynchronous, rx_framing_error) - 4 ms
TEST(Serial_Asynchronous, rx_parity_error) - 1 ms
TEST(Serial_Asynchronous, long_tx_long_rx) - 1 ms
TEST(Serial_Asynchronous, short_tx_short_rx) - 0 ms
TEST(Serial_Asynchronous, short_tx_0_rx) - 0 ms

OK (8 tests, 8 ran, 28 checks, 0 ignored, 0 filtered out, 56 ms)

{{success}}
{{end}}